The RUT200 low cost 4G router from Teltonika is a compact industrial cellular router that provides reliable, mission-critical connectivity in rigorous conditions common in industries like automation, transportation, and manufacturing. This model is equipped with 4G LTE, Wi-Fi, and two Ethernet ports, making it ideal for quickly setting up primary and backup connectivity with remote management capabilities.
RUT200 Features
MOBILE
- Embedded Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
- 3GPP ReleaseRelease 9
- StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
- USSDSupports sending and reading Unstructured Supplementary Service Data messages
- Black/White listOperator black/white list
- Multiple PDNPossibility to use different PDNs for multiple network access and services
- Band managementBand lock, Used band status display
- APNAuto APN
- BridgeDirect connection (bridge) between mobile ISP and device on LAN
- PassthroughRouter assigns its mobile WAN IP address to another device on LAN
WIRELESS
- Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
- WiFi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
- SSID/ESSIDSSID stealth mode and access control based on MAC address
- WiFi usersUp to 50 simultaneous connections
- Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes
- Wireless Connectivity FeaturesFast roaming (802.11r), Relayd
ETHERNET
- WAN1 x WAN port 10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
- LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
NETWORK
- RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
- Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
- VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
- Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
- FirewallPort forward, traffic rules, custom rules
- DHCPStatic and dynamic IP allocation, DHCP Relay
- QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
- DDNSSupported >25 service providers, others can be configured manually
- Network backupWiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
- Load balancingBalance Internet traffic over multiple WAN connections
- SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
- AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
- FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
- Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
- VLANPort and tag-based VLAN separation
- Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
- WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
- Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
- OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
- OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
- IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
- GREGRE tunnel, GRE tunnel over IPsec support
- PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
- StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
- DMVPNMethod of building scalable IPsec VPNs
- SSTPSSTP client instance support
- ZeroTierZeroTier VPN client support
- WireGuardWireGuard VPN client and server support
- TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.
MODBUS TCP SLAVE
- ID rangeRespond to one ID in range [1;255] or any
- Allow Remote AccessAllow access through WAN
- Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality
MODBUS TCP MASTER
- Supported functions01, 02, 03, 04, 05, 06, 15, 16
- Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)
MODBUS DATA TO SERVER
- ProtocolHTTP(S), MQTT, Azure MQTT, Kinesis
MQTT GATEWAY
- MQTT GatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker
DNP3
- Supported modesTCP Master, DNP3 Outstation
MONITORING & MANAGEMENT
- WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
- FOTAFirmware update from server, automatic notification
- SSHSSH (v1, v2)
- SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
- CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
- TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
- MQTTMQTT Broker, MQTT publisher
- SNMPSNMP (v1, v2, v3), SNMP Trap
- JSON-RPCManagement API over HTTP/HTTPS
- MODBUSMODBUS TCP status/control
- RMSTeltonika Remote Management System (RMS)
IOT PLATFORMS
- Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
- ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
- CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
- Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type
SYSTEM CHARACTERISTICS
- CPUMediatek, 580 MHz, MIPS 24Kc
- RAM128 MB, DDR2
- FLASH storage16 MB, SPI Flash
FIRMWARE / CONFIGURATION
- WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
- FOTAUpdate FW
- RMSUpdate FW/configuration for multiple devices at once
- Keep settingsUpdate FW without losing current configuration
FIRMWARE CUSTOMIZATION
- Operating systemRutOS (OpenWrt based Linux OS)
- Supported languagesBusybox shell, Lua, C, C++
- Development toolsSDK package with build environment provided
INPUT / OUTPUT
- Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
- Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
- EventsEmail, RMS, SMS
- I/O jugglerAllows to set certain I/O conditions to initiate event
POWER
- Connector4-pin industrial DC power socket
- Input voltage range9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
- PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 30 VDC
- Power consumption< 6.5 W Max
PHYSICAL INTERFACES
- Ethernet2 x RJ45 ports, 10/100 Mbps
- I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
- Status LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
- SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
- Power1 x 4-pin power connector
- Antennas
2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors - ResetReboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
- Casing materialAluminium housing, plastic panels
- Dimensions (W x H x D)83 x 25 x 74 mm
- Weight125 g
- Mounting optionsBottom and sideways DIN rail mounting slots
OPERATING ENVIRONMENT
- Operating temperature-40 °C to 75 °C
- Operating humidity10% to 90% non-condensing
- Ingress Protection RatingIP30
REGULATORY & TYPE APPROVALS
- RegulatoryCB
SAFETY
- Standards IEC 62368-1:2018 (CB Scheme)
PACKAGE CONTAINS
- Router RUT200
- 9 W PSU
- 2 x LTE antennas (swivel, SMA male)
- 1 x WiFi antenna (swivel, RP-SMA male)
- QSG (Quick Start Guide)
- Packaging box
STANDARD ORDER CODES
| Product code | HS Code | HTS Code | Package contains |
|---|---|---|---|
| RUT200 010000 | 851762 | 8517.62.00 | Standard package with Euro PSU |
| RUT200 024000 | 851762 | 8517.62.00 | Standard package with AU PSU |
For more information on all available packaging options – please contact us directly.
AVAILABLE VERSIONS
| Product code | Region | Frequency |
|---|---|---|
| RUT200 *2**** | Latin America | 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28, B664G (LTE-TDD): B403G: B1, B2, B4, B5, B82G: B2, B3, B5, B8 |
| RUT200 *1**** | Europe1, Australia, Asia-Pacific | 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B284G (LTE-TDD): B38, B40, B413G: B1, B5, B82G: B3, B8 |
| RUT200 *3**** | China, India | 4G (LTE-FDD): B1, B3, B5, B84G (LTE-TDD): B34, B38, B39, B40, B413G: B1, B5, B82G: B3, B8 |
Teltonika RMS
The Teltonika RUT200 4G Router replaces the popular RUT240 / RUT241 and provides a low cost 4G Internet connectivity solution for M2M Remote Access and Monitoring applications such as kiosks, CCTV and energy (wind / solar) installations.
Teltonika RMS is a service that lets you monitor and manage all your Teltonika devices.
It is a powerful solution for remote access and management allowing users to save time and operational costs while being flexible and easy to use. With RMS you can manage compatible Teltonika Networks routers and gateways, reach remote devices, utilize the power of remote desktop access and configure secure VPN tunnels with just a few clicks.
To fit the requirements of different user profiles, we offer various functionalities of RMS available separately, so you may choose only what your business needs and save on costs.
The Teltonika RMS works with all routers including older routers such as the RUT240, RUT950 and RUT955 as well as the newer 4G routers including the RUT200, RUT241, RUT901, RUT951 and RUT955 and even the new Teltonika 5G Routers RUTX50 and RUTM50