Teltonika RUT200

The RUT200 low cost 4G router from Teltonika is a compact industrial cellular router that provides reliable, mission-critical connectivity in rigorous conditions common in industries like automation, transportation, and manufacturing. This model is equipped with 4G LTE, Wi-Fi, and two Ethernet ports, making it ideal for quickly setting up primary and backup connectivity with remote management capabilities.

RUT200 Features

MOBILE

  • Embedded Mobile module4G (LTE) – Cat 4 up to 150 Mbps, 3G – Up to 42 Mbps, 2G – Up to 236.8 kbps
  • 3GPP ReleaseRelease 9
  • StatusSignal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP, Bytes sent/received, connected band, IMSI, ICCID
  • SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP
  • USSDSupports sending and reading Unstructured Supplementary Service Data messages
  • Black/White listOperator black/white list
  • Multiple PDNPossibility to use different PDNs for multiple network access and services
  • Band managementBand lock, Used band status display
  • APNAuto APN
  • BridgeDirect connection (bridge) between mobile ISP and device on LAN
  • PassthroughRouter assigns its mobile WAN IP address to another device on LAN

WIRELESS

  • Wireless modeIEEE 802.11b/g/n, Access Point (AP), Station (STA)
  • WiFi securityWPA2-Enterprise – PEAP, WPA2-PSK, WEP, WPA-EAP, WPA-PSK; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • SSID/ESSIDSSID stealth mode and access control based on MAC address
  • WiFi usersUp to 50 simultaneous connections
  • Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, SMS authorization, internal/external landing page, walled garden, user scripts, URL parameters, user groups, individual user or group limitations, user management, 9 default customizable themes
  • Wireless Connectivity FeaturesFast roaming (802.11r), Relayd

ETHERNET

  • WAN1 x WAN port  10/100 Mbps, compliance IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX
  • LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX

NETWORK

  • RoutingStatic routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2, EIGRP, NHRP), Policy based routing
  • Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet, SMPP, SMNP, MQTT, Wake On Lan (WOL)
  • VoIP passthrough supportH.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoringPing Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP for link inspection
  • FirewallPort forward, traffic rules, custom rules
  • DHCPStatic and dynamic IP allocation, DHCP Relay
  • QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNSSupported >25 service providers, others can be configured manually
  • Network backupWiFi WAN, Mobile, VRRP, Wired options, each of which can be used as an automatic Failover
  • Load balancingBalance Internet traffic over multiple WAN connections
  • SSHFSPossibility to mount remote file system via SSH protocol

SECURITY

  • AuthenticationPre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
  • FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLANPort and tag-based VLAN separation
  • Mobile quota controlMobile data limit, customizable period, start time, warning limit, phone number
  • WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPNMultiple clients and a server can run simultaneously, 27 encryption methods
  • OpenVPN EncryptionDES-CBC 64, RC2-CBC 128, DES-EDE-CBC 128, DES-EDE3-CBC 192, DESX-CBC 192,BF-CBC 128, RC2-40-CBC 40, CAST5-CBC 128, RC2-64-CBC 64, AES-128-CBC 128, AES-128-CFB 128, AES-128-CFB1 128, AES-128-CFB8 128, AES-128-OFB 128, AES-128-GCM 128, AES-192-CFB 192, AES-192-CFB1 192, AES-192-CFB8 192, AES-192-OFB 192, AES-192-CBC 192, AES-192-GCM 192, AES-256-GCM 256, AES-256-CFB 256, AES-256-CFB1 256, AES-256-CFB8 256, AES-256-OFB 256, AES-256-CBC 256
  • IPsecIKEv1, IKEv2, with 14 encryption methods for IPsec (3DES, DES, AES128, AES192, AES256, AES128GCM8, AES192GCM8, AES256GCM8, AES128GCM12, AES192GCM12, AES256GCM12, AES128GCM16, AES192GCM16, AES256GCM16)
  • GREGRE tunnel, GRE tunnel over IPsec support
  • PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3, L2TP over IPsec support
  • StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPNMethod of building scalable IPsec VPNs
  • SSTPSSTP client instance support
  • ZeroTierZeroTier VPN client support
  • WireGuardWireGuard VPN client and server support
  • TincTinc offers encryption, authentication and compression in it’s tunnels. Client and server support.

MODBUS TCP SLAVE

  • ID rangeRespond to one ID in range [1;255] or any
  • Allow Remote AccessAllow access through WAN
  • Custom registersMODBUS TCP custom register block requests, which read/write to a file inside the router, and can be used to extend MODBUS TCP Slave functionality

MODBUS TCP MASTER

  • Supported functions01, 02, 03, 04, 05, 06, 15, 16
  • Supported data formats8-bit: INT, UINT; 16-bit: INT, UINT (MSB or LSB first); 32-bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC)

MODBUS DATA TO SERVER

  • ProtocolHTTP(S), MQTT, Azure MQTT, Kinesis

MQTT GATEWAY

  • MQTT GatewayAllows sending commands and receiving data from MODBUS Master through MQTT broker

DNP3

  • Supported modesTCP Master, DNP3 Outstation

MONITORING & MANAGEMENT

  • WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTAFirmware update from server, automatic notification
  • SSHSSH (v1, v2)
  • SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • CallReboot, Status, Mobile data on/off, Output on/off, answer/hang-up with a timer, WiFi on/off
  • TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
  • MQTTMQTT Broker, MQTT publisher
  • SNMPSNMP (v1, v2, v3), SNMP Trap
  • JSON-RPCManagement API over HTTP/HTTPS
  • MODBUSMODBUS TCP status/control
  • RMSTeltonika Remote Management System (RMS)

IOT PLATFORMS

  • Cloud of ThingsAllows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • CumulocityAllows monitoring of: Device Model, Revision and Serial Number, WAN Type and IP, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength
  • Azure IoT HubCan send device IP, Number of bytes send/received, Temperature, PIN count to Azure IoT Hub server, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type

SYSTEM CHARACTERISTICS

  • CPUMediatek, 580 MHz, MIPS 24Kc
  • RAM128 MB, DDR2
  • FLASH storage16 MB, SPI Flash

FIRMWARE / CONFIGURATION

  • WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
  • FOTAUpdate FW
  • RMSUpdate FW/configuration for multiple devices at once
  • Keep settingsUpdate FW without losing current configuration

FIRMWARE CUSTOMIZATION

  • Operating systemRutOS (OpenWrt based Linux OS)
  • Supported languagesBusybox shell, Lua, C, C++
  • Development toolsSDK package with build environment provided

INPUT / OUTPUT

  • Input1 x Digital Input, 0 – 6 V detected as logic low, 8 – 30 V detected as logic high
  • Output1 x Digital Output, Open collector output, max output 30 V, 300 mA
  • EventsEmail, RMS, SMS
  • I/O jugglerAllows to set certain I/O conditions to initiate event

POWER

  • Connector4-pin industrial DC power socket
  • Input voltage range9 – 30 VDC, reverse polarity protection; surge protection >31 VDC 10us max
  • PoE (passive)Passive PoE over spare pairs. Possibility to power up through LAN port, not compatible with IEEE802.3af, 802.3at and 802.3bt standards, Mode B, LAN1 Port, 9 – 30 VDC
  • Power consumption< 6.5 W Max

PHYSICAL INTERFACES

  • Ethernet2 x RJ45 ports, 10/100 Mbps
  • I/O’s1 x Digital Input, 1 x Digital Output on 4-pin power connector
  • Status LEDs3 x Connection type status LEDs, 5 x Connection strength LEDs, 2 x LAN status LEDs, 1 x Power LED
  • SIM1 x SIM slot (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder
  • Power1 x 4-pin power connector
  • Antennas
     2 x SMA for LTE, 1 x RP-SMA for WiFi antenna connectors
  • ResetReboot/User default reset/Factory reset button

PHYSICAL SPECIFICATION

  • Casing materialAluminium housing, plastic panels
  • Dimensions (W x H x D)83 x 25 x 74 mm
  • Weight125 g
  • Mounting optionsBottom and sideways DIN rail mounting slots

OPERATING ENVIRONMENT

  • Operating temperature-40 °C to 75 °C
  • Operating humidity10% to 90% non-condensing
  • Ingress Protection RatingIP30

REGULATORY & TYPE APPROVALS

  • RegulatoryCB

SAFETY

  • Standards IEC 62368-1:2018 (CB Scheme)

PACKAGE CONTAINS

  • Router RUT200
  • 9 W PSU
  • 2 x LTE antennas (swivel, SMA male)
  • 1 x WiFi antenna (swivel, RP-SMA male)
  • QSG (Quick Start Guide)
  • Packaging box

STANDARD ORDER CODES

Product codeHS CodeHTS CodePackage contains
RUT200 0100008517628517.62.00 Standard package with Euro PSU
RUT200 0240008517628517.62.00Standard package with AU PSU

For more information on all available packaging options – please contact us directly.

AVAILABLE VERSIONS

Product codeRegionFrequency
RUT200 *2****Latin America 4G (LTE-FDD): B1, B2, B3, B4, B5, B7, B8, B28, B664G (LTE-TDD): B403G: B1, B2, B4, B5, B82G: B2, B3, B5, B8
RUT200 *1****Europe1, Australia, Asia-Pacific 4G (LTE-FDD): B1, B3, B5, B7, B8, B20, B284G (LTE-TDD): B38, B40, B413G: B1, B5, B82G: B3, B8
RUT200 *3**** China, India4G (LTE-FDD): B1, B3, B5, B84G (LTE-TDD): B34, B38, B39, B40, B413G: B1, B5, B82G: B3, B8

Teltonika RMS

The Teltonika RUT200 4G Router replaces the popular RUT240 / RUT241 and provides a low cost 4G Internet connectivity solution for M2M Remote Access and Monitoring applications such as kiosks, CCTV and energy (wind / solar) installations.

Teltonika RMS is a service that lets you monitor and manage all your Teltonika devices.

It is a powerful solution for remote access and management allowing users to save time and operational costs while being flexible and easy to use. With RMS you can manage compatible Teltonika Networks routers and gateways, reach remote devices, utilize the power of remote desktop access and configure secure VPN tunnels with just a few clicks.

To fit the requirements of different user profiles, we offer various functionalities of RMS available separately, so you may choose only what your business needs and save on costs.

The Teltonika RMS works with all routers including older routers such as the RUT240, RUT950 and RUT955 as well as the newer 4G routers including the RUT200, RUT241, RUT901, RUT951 and RUT955 and even the new Teltonika 5G Routers RUTX50 and RUTM50

Teltonika TCR100 4G Router for home/office

The TCR100 is the new consumer router from Teltonika. It has an embedded 4G modem and SIM card slot so you can insert a 4G SIM card and the router can connect to the high speed 4G mobile broadband Internet. Teltonika is traditionally associated with industrial grade and M2M routers that provide reliable and secure connectivity for remote monitoring and management of devices over the 4G network. Teltonika routers such as the RUT240, RUT950, RUT951, RUT955 and RUT956.

Teltonika decided that they should take their knowledge and experience in creating reliable 4G mobile broadband routers and develop a product specifically designed for the consumer marketplace. The Teltonika TCR100 (Teltonika Consumer Router) is the result. It offers an easy to use router configuration whilst retaining the features associated with industrial grade routers to ensure a reliable and secure 4G Internet connection for the home or office user.

TCR100

4G WI-FI ROUTER FOR HOME USER

4G LTE-ADVANCED

LTE CAT6 enables cellular speeds up to 300Mbps with carrier aggregation

WI-FI

Dual-Band with 2.4 GHz & 5.0 GHz frequencies

DURABLE

Rugged housing with heatsink for thermal efficiency

SECURE

Firewall and numerous VPN services including OpenVPN, IPsec, PPTP, L2TP & DMVPN

RMS

Compatible with our RMS enabling remote access and on-demand VPN services

RUTOS

Powerful OS with intuitive UI based on OpenWrt empowers endless configuration possibilities.MEET THE TCR100

This router represents our extensive industrial IoT experience brought straight to your home.

With 4G LTE-A technology you can use TCR100 as a primary or a backup connectivity source.

Two Ethernet interfaces and Dual-band Wi-Fi allow to connect multiple devices with ease!

TCR100 features connectivity indicators, Wi-Fi, and Wi-Fi Protected buttons for quick and simple setup.

Reliable, secure and easy to use – TCR100 is the perfect choice for any home network.

TCR100 SPECIFICATION

MOBILE
Mobile module4G+ (LTE-A) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
StatusSignal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCID
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
USSDSupports sending and reading Unstructured Supplementary Service Data messages
Black/White listTCR100 can allow operator black/white list
Multiple PDNPossibility to use different PDNs for multiple network access and services
Band managementBand lock, Used band status display
APNAuto APN
Bridge modeDirect connection (bridge) between mobile ISP and device on LAN
WIRELESS
Wireless mode2.4 GHz (802.11 b/g/n, 2×2 MIMO), 5 GHz (802.11 ac, 1×1 MIMO), Access Point (AP), Station (STA)
WiFi securityWPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
ESSIDESSID stealth mode
Wireless HotspotCaptive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customizable landing page, walled garden
Wireless mesh/roamingWireless mesh (802.11s), fast roaming (802.11r)
ETHERNET
WAN1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
LAN1 x LAN port, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
NETWORK
RoutingStatic routes, Dynamic routes
Network protocolsTCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP, MQTT, Wake on LAN (WOL)
Connection monitoringPing Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
FirewallPort forwards, traffic rules, NAT rules, custom rules
DHCPStatic and dynamic IP allocation, DHCP Relay, Relayd
QoS / Smart Queue Management (SQM)Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
DDNSSupported >25 service providers, others can be configured manually
Network backupMobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
Load balancingBalance Internet traffic over multiple WAN connections
SSHFSPossibility to mount remote file system via SSH protocol
SECURITY
AutheticationPre-shared key, digital certificates, X.509 certificates
FirewallPre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
Attack preventionDDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
VLANTag based VLAN separation
Mobile quota controlCustom data limits for both SIM cards
WEB filterBlacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
Access controlFlexible access control of TCP, UDP, ICMP packets, MAC address filter
VPN
OpenVPNMultiple clients and a server can run simultaneously, 12 encryption methods
OpenVPN EncryptionDES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
IPSecIKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
GREGRE tunnel
PPTP, L2TPClient/Server instances can run simultaneously, L2TPv3 support
StunnelProxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
DMVPNMethod of building scalable IPsec VPNs
SSTPSSTP client instance support
ZeroTierZeroTier VPN client support
WireGuardWireGuard VPN client and server support
MODBUS
MODBUS TCP SLAVE
ID filteringRespond to one ID in range [1;255] or any
Allow remote accessAllow access through WAN
Custom registersMODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality
MODBUS TCP MASTER
Supported functions01, 02, 03, 04, 05, 06, 15, 16
Supported data formats8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII
MQTT GATEWAY
GatewayAllows sending commands and receiving data from MODBUS Master trough MQTT broker
DNP3
Supported modesTCP Master, DNP3 Outstation
DATA TO SERVER
ProtocolsHTTP(S), MQTT, Azure MQTT, Kinesis
MONITORING & MANAGEMENT
WEB UIHTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
FOTAFirmware update from server, automatic notification
SSHSSH (v1, v2)
SMSSMS status, SMS configuration, send/read SMS via HTTP POST/GET
CallReboot, Status, Mobile data on/off, Output on/off
TR-069OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem
MQTTMQTT Broker, MQTT publisher
SNMPSNMP (v1, v2, v3), SNMP trap
JSON-RPCManagement API over HTTP/HTTPS
MODBUSMODBUS TCP status/control
RMSTeltonika Remote Management System (RMS)
IoT PLATFORMS
Clouds of thingsAllows monitoring of: Device data, Mobile data, Network info, Availability
ThingWorxAllows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
CumulocityAllows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
Azure IoT HubCan send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server
SYSTEM CHARACTERISTICS
CPUQCA9531, MIPS 24kc, 650 MHz
RAM128 MB, DDR2
FLASH storage16 MB, SPI Flash
FIRMWARE / CONFIGURATION
WEB UIUpdate FW from file, check FW on server, configuration profiles, configuration backup
FOTAUpdate FW/configuration from server
RMSUpdate FW/configuration for multiple devices at once
Keep settingsUpdate FW without losing current configuration
POWER
Connector4 pin industrial DC power socket
Input voltage range9 – 30 VDC, reverse polarity protection, voltage surge/transient protection
Power consumption3.7 W average, 9.3 W max
PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTONS, SIM)
Ethernet2 x RJ45 ports, 10/100 Mbps
Status LEDs1 x Internet, 1 x WiFi, 3 x Mobile connection strength, 2 x Ethernet status
SIM1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holder (Embedded SIM variant available)
Antenna2 x SMA for LTE, 2 x Internal for 2.4 GHz WiFi, 1 x Internal for 5 GHz WiFi
Power1 x 4 pin DC connector
WPSWPS activation button
WiFi On/OffWiFi enable/disable button
ResetReboot/User default reset/Factory reset button
PHYSICAL SPECIFICATION
Casing materialPlastic housing with aluminum screws and heatsink
Dimensions (W x H x D)150 x 37 x 105 mm
Weight376 g
Mounting optionsFlat surface placement
OPERATING ENVIRONMENT
Operating temperature-40 C to 75 C
Operating humidity10 % to 90 % non-condensing

The Teltonika TCR100 4G Router is the ideal choice for home and business users that want a robust, reliable and secure 4G router. Essentially those customers that may have previously purchased the Teltonika RUT950 or RUT240 routers because they believed that because they were Industrial 4G routers they must be better than 4G routers for the home and office. Teltonika has resolved this issue ands meets the need in the consumer marketplace and the TCR100 router has beefed up 4G modem, faster Ethernet and dual band WiFi which is not available on the standard Teltonika routers.

RUT360 CAT6 4G Router for M2M

Teltonika RUT360 4G Router is a compact, industrial, M2M router that connects to the internet using cellular and provides WiFi, and wired networks for LAN connectivity. Ideally used with a Fixed IP SIM Card, The RUT360 is a great value, M2M 4G Router for many remote monitoring and management applications.

Teltonika RUT360 Key Features

  • Cellular speeds up to 300Mbps with Carrier Aggregation
  • 802.11 b/g/n WiFi
  • Small size – easy integration anywhere
  • Rugged aluminium housing
  • Firewall and numerous VPN services, including OpenVPN, IPsec, PPTP, L2TP & SSTP
  • Compatible with Teltonika Remote Management System

The RUT360 router is equipped with two Ethernet interfaces, 802.11 b/g/n WiFi, and 4G LTE Cat 6 cellular module, offering data speeds up to 300 Mbps.

It offers Unique programming, remote monitoring, and security features, making the RUT360 perfect for IoT and M2M applications, where secure and reliable connectivity is a must. Carrier aggregation functionality makes this compact device irreplaceable in areas or applications where cellular data speeds are limited.

Teltonika RUT360 – Technical Specifications

Mobile

  • Mobile module 4G (LTE) – Cat 6 up to 300 Mbps, 3G – Up to 42 Mbps
  • Status Signal strength, SINR, RSRP, RSRQ, Bytes sent/received, connected band, carrier aggregation, IMSI, ICCIDSMS 
  • SMS status, SMS configuration, send/read SMS via HTTP POST/GET, Email to SMS, SMS to Email, SMS to HTTP, SMS to SMS, SMS auto reply
  • USSD Supports sending and reading Unstructured Supplementary Service Data messages
  • Black/Whiles list (planned) Operator black/white list
  • Multiple PDN Possibility to use different PDNs for multiple network access and servicesBand management Band lock, Used band status display
  • APN Auto APN
  • Bridge mode Direct connection (bridge) between mobile ISP and device on LAN

Wireless

  • Wireless mode: 802.11 b/g/n, 2×2 MIMO, Access Point (AP), Station (STA)
  • WiFi security: WPA3-EAP, WPA3-SAE, WPA2-Enterprise-PEAP, WPA2-PSK, WEP; AES-CCMP, TKIP, Auto Cipher modes, client separation
  • ESSID: ESSID stealth mode
  • Wireless Hotspot: Captive portal (Hotspot), internal/external Radius server, SMS OTP, MAC auth, built in customisable landing page, walled garden

Ethernet

  • WAN: 1 x WAN port (can be configured as LAN) 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover
  • LAN: 1 x LAN ports, 10/100 Mbps, compliance with IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover

Network

  • Routing Static routes, Dynamic routes (planned)
  • Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP (planned), SMTP, SSL v3, TLS, ARP, VRRP, PPP, PPPoE, UPNP, SSH, DHCP, Telnet client, SNMP (planned), MQTT (planned), Wake on LAN (WOL) (planned)
  • VoIP passthrough support H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets
  • Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection
  • Firewall Port forwards, traffic rules, NAT rules, custom rules
  • DHCP Static and dynamic IP allocation, DHCP Relay, Relayd
  • QoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e
  • DDNS (planned) Supported >25 service providers, others can be configured manually
  • Network backup Mobile, Wired and WiFi WAN options, each of which can be used as an automatic Failover
  • Load balancing Balance Internet traffic over multiple WAN connections
  • SSHFS (optional) Possibility to mount remote file system via SSH protocol (not available in standard FW)

Security

  • Authetication Pre-shared key, digital certificates, X.509 certificates
  • Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T
  • Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks)
  • VLAN Tag based VLAN separation
  • Mobile quota control Custom data limits for both SIM cards
  • WEB filter (planned) Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only
  • Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter

VPN

  • OpenVPN Multiple clients and a server can run simultaneously, 12 encryption methods
  • OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC
  • IPSec IKEv1, IKEv2, with 5 encryption methods for IPsec (DES, 3DES, AES128, AES192, AES256)
  • GRE GRE tunnel
  • PPTP, L2TP Client/Server instances can run simultaneously, L2TPv3 support (planned)
  • Stunnel (planned) Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code
  • DMVPN (planned) Method of building scalable IPsec VPNs
  • SSTP (planned) SSTP client instance support
  • ZeroTier ZeroTier VPN client support
  • WireGuard WireGuard VPN client and server support

Monitoring and Management

  • WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log
  • FOTA Firmware update from server, automatic notification
  • SSH SSH (v1, v2)
  • SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET
  • Call Reboot, Status, Mobile data on/off, Output on/off
  • MQTT (planned) MQTT Broker, MQTT publisher
  • SNMP (planned) SNMP (v1, v2, v3), SNMP trap
  • JSON-RPC Management API over HTTP/HTTPS
  • Modbus (planned) Modbus TCP status/control
  • RMS Teltonika Remote Management System (RMS)

IoT Platforms

  • Clouds of things Allows monitoring of: Device data, Mobile data, Network info, Availability
  • ThingWorx Allows monitoring of: WAN Type, WAN IP, Mobile Operator Name, Mobile Signal Strength, Mobile Network Type
  • Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP
  • Azure IoT Hub Can send device IP, Number of bytes send/received, Mobile connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, SIM State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server.

System Characteristics

  • CPU QCA9531, MIPS 24kc, 650 MHz
  • RAM 128 MB, DDR2
  • FLASH storage 16 MB, SPI Flash

Firmware / Configuaration

  • WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup
  • FOTA Update FW/configuration from server
  • RMS Update FW/configuration for multiple devices at once
  • Keep settings Update FW without losing current configuration

Physical Interfaces

  • Ethernet 2 x RJ45 ports, 10/100 Mbps
  • I/Os 2 x Configurable digital Inputs/Outputs on 4 pin power connector
  • Status LEDs 2 x Mobile connection type, 3 x Mobile connection strength, 2 x Eth status, 1 x Power
  • SIM 1 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, external SIM holders
  • Antenna 2 x SMA for LTE, 2 x RP-SMA for WiFi
  • Power 1 x 4 pin DC connector
  • Reset Reboot/User default reset/Factory reset button

Physical Specification

  • Casing material: Aluminium housing with DIN rail mounting option
  • Dimensions (W x H x D): 100 x 30 x 85 mm
  • Weight: 247 g
  • Mounting options: DIN rail, flat surface placement

The RUT360 router is supplied with a UK PSU and elbow joint antennas for Cell and WiFi. The antennas are detachable and the connector is SMA so this means you can attach an outdoor 4G antenna if required.

This router has a single SIM card slot so you can insert a 4G SIM Card. Ideally the RUT360 router is used with a Fixed IP SIM Card which will enable the router to be remotely accessed for easy connectivity to the attached devices on the LAN.

Teltonika RUT240

Teltonika RUT240 is the new LTE 4G Router that provides a cheap 4G connectivity solution for M2M remote monitoring and management applications such as 4G CCTV for users that want a low cost 4G router with 2 x Ethernet Ports and WiFi.

RUT240

Teltonika claim that the RUT240 has a maximum download speed of up to 70Mbps, this is slower than many other 4G routers that use CAT4 LTE 4G Modems but should suffice for the majority of 4G M2M applications.

Whilst many manufacturers are moving to faster 4G LTE modems such as the new CAT6 LTE 4G Modem to provide worldwide connectivity with the fastest 4G speeds, Teltonika have focused upon offering the lowest price product for the cost conscious buyer who want the cheapest product for their application.

The RUT240 provides 2 x Ethernet Ports and WiFi so should be suitable for most users that want a low cost 4G router with basic functionality.